When purchasing Egw or any other brand from eGoods365.com store, you can be sure that (a) you are purchasing from US based company with the most responsive and friendly customer service; (b) an authentic, not a counterfeit and not a refurbished product.

The rear sight plate on your gun needs to be removed to install your red dot on this plate. The plate is mounted to the slide from underneath the slide using the provided 4-40 screws. The red dot is then installed on top of the adapter plate using the provided 6-32 screws.

Installation Instructions


Remove the rear sight*

Install the EGW Sight Mount in the dovetail

Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)

Apply blue Loctite to the provided mounting screws

Torque mounting screws to 15in/lbs


Modification of your firearm may nullify the manufacturer's warranty.


This product should be installed and checked by a qualified gunsmith.

No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.

Dose not work with Sig P320RX, P320 X-Five W/Romeo1 Cut or M17 Military Surplus.