When purchasing Apex Tactical Specialties or any other brand from eGoods365.com store, you can be sure that (a) you are purchasing from US based company with the most responsive and friendly customer service; (b) an authentic, not a counterfeit and not a refurbished product.

The Flat-Faced Forward Set Sear & Trigger Kit from Apex Tactical is a replacement for the factory trigger on your M&P firearm. It reduces the pull weight, pre-travel, and over-travel, resulting in a trigger pull similar to a 1911. The kit includes an aluminum flat-faced trigger, a forward-set sear, an ultimate striker block kit (striker block, spring, and installation tool), and a forward-set spring pack (containing a 3lb. and 4lb. trigger return spring, sear spring, RAM spring, and plastic slave pin to aid installation).

Apex's Forward Set Sear releases the striker farther forward than the factory sear, shortening the pull length, while the Ultimate Striker Block has an improved radius on the striker block face, smoothing out the pull, and eliminating the false reset problem that affects some M&Ps.

The kit includes two trigger return springs offering a 3 lb. or 4 lb. pull weight. The straight, flat trigger face allows a lower finger position, helping leverage and allowing for better control and consistent placement (not recommended for duty/carry use).

Installation of the Apex Tactical Flat Faced Forward Set Sear & trigger kit requires minor gunsmithing: modification of the trigger bar loop. This kit fits all S&W M&P centerfire pistols manufactured after June 2011 with the larger-size (1/8" dia.) sear plunger and spring. It does not fit the M2.0, Shield, BodyGuard, and .22 LR models.

If you have a pre-June 2011 pistol, the plunger/spring will be 1/16" in diameter. However, the Flat-Faced Forward Set Sear & Trigger Kit can be installed on an M&P manufactured before June 2011 if retro-fitted with the newer sear housing block that accepts the 1/8" spring and plunger - # 940-000-958, sold separately.