When purchasing Apex Tactical Specialties or any other brand from eGoods365.com store, you can be sure that (a) you are purchasing from US based company with the most responsive and friendly customer service; (b) an authentic, not a counterfeit and not a refurbished product.

The Flat-Faced Forward Set Sear & Trigger Kit, manufactured by Apex Tactical, offers a drop-in replacement for your M&P's factory trigger. This kit reduces pull weight, pre-travel and over-travel, creating a trigger pull similar to that of a 1911. The trigger face is designed to replicate the feel of a flat 1911 trigger, whilst retaining the full function and reliability of S&W's pivoting passive safety lever. This kit contains an aluminum flat-faced trigger, forward set sear, ultimate striker block kit (striker block, spring and installation tool) and forward set spring pack (3 lb. and 4 lb. trigger return springs, sear spring, RAM spring and plastic slave pin to aid installation).

The Forward Set Sear, manufactured by Apex, shortens the pull length by releasing the striker at a point farther forward than the factory sear. The kit's Ultimate Striker Block has an improved radius on the striker block face that helps smooth out the pull and eliminates the false reset problem that affects some M&Ps.

Apex includes two trigger return springs that allow you to choose between a 3 lb. or 4 lb. pull weight. Both options are lighter than the factory pull and offer better control for more consistent shot placement (however, the 3 lb. pull is not recommended for duty/carry use). The straight, flat trigger face allows for a lower finger position, which provides extra leverage and better control, taking full advantage of the lower pull weight.

The Apex Tactical Flat Faced Forward Set Sear & trigger kit fits all S&W M&P centerfire pistols manufactured after June 2011 with the larger-size (1/8" dia.) sear plunger and spring. However, it does not fit the M2.0, Shield, BodyGuard, and .22 LR models (see note below for pre-2011 M&Ps). Please note that installation may require minor gunsmithing, specifically modification of the trigger bar loop.

Brownells Gun Tech(tm) Note: The Flat-Faced Forward Set Sear & Trigger Kit can be installed on an M&P manufactured before June 2011 if it is retro-fitted with the newer sear housing block that accepts the 1/8" spring and plunger. The sear housing block is sold separately and is listed as #940-000-958. For pre-June 2011 M&Ps, the plunger/spring size is 1/16" in diameter.