When purchasing Egw or any other brand from eGoods365.com store, you can be sure that (a) you are purchasing from US based company with the most responsive and friendly customer service; (b) an authentic, not a counterfeit and not a refurbished product.

7075 Aluminum material is used to manufacture this EGW red dot sight mount. The coating used on this mount is Matte Black Hardcoat. It has an overall length of 1.811" and an overall width of .99".

The EGW red dot sight mount is fitted with Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, and Docter red-dot sights. The mounting hardware that comes with this mount includes two 6-32 Button Head Screws, two 6-32 Flat Head Screws, and one 6-32 Set Screw.

The mounting procedure requires the removal of the rear sight from the gun. The EGW Sight Mount is then installed in the dovetail from left to right, with the muzzle facing forward. A progressive dovetail taper makes the installation easier. The mounting screws provided with this mount should be torqued at 15in/lbs, and they require a 5/64'' allen wrench for installation.

After the EGW Sight Mount is installed, the red dot sight can be installed on it. Use a small piece of paper between the red dot sight and the sight mount to make the removal easier, and to avoid the red dot sight from coming in contact with the Loctite adhesive. The two button head cap screws provided are for the Vortex Viper and Venom sights, and the two flat head cap screws provided are for the Burris FastFire and Docter sights.