When purchasing Egw or any other brand from eGoods365.com store, you can be sure that (a) you are purchasing from US based company with the most responsive and friendly customer service; (b) an authentic, not a counterfeit and not a refurbished product.

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.811"
Overall Width: .99"

Mounting Hardware:
- (2) 6-32 Flat Head Screws
- (1) 6-32 Set Screw

Red Dot Fitment: Trijicon RMR

Please take note of the Pre-2017 and Post-2017 differences when placing your order:
- Pre-2017 rear shelf behind the dovetail is .187"
- Post-2017 rear shelf behind the dovetail is .120"

Simply remove the rear sight on your gun and replace it with our mount to mount your Trijicon RMR. No alterations are required. Mounting hardware is included. You can take our mount off and replace your rear sight at any time.

Installation Instructions:

1. Remove the rear sight*.
2. Install the EGW Sight Mount in the dovetail.
3. Tighten set screw (if applicable).
4. Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight).
5. Apply blue Loctite to the provided mounting screws.
6. Torque mounting screws to 15in/lbs.

*Note: The flat head screws that are included with this mount require a 5/64'' allen wrench for installation.