When purchasing Egw or any other brand from eGoods365.com store, you can be sure that (a) you are purchasing from US based company with the most responsive and friendly customer service; (b) an authentic, not a counterfeit and not a refurbished product.

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.780"
Overall Width: 1.1"

Mounting Hardware:
- (2) 6-32 Flat Head Screws
- (1) 6-32 X 3/16 Set Screw

Red Dot Fitment: Trijicon RMR, Holosun HS507C

This mount is compatible with:
- Baby Desert Eagle (Post 2006)
- EAA Witness Elite Match

This mount is not compatible with:
- Rock Island 1911s

To install:
1. Remove the rear sight* from your gun
2. Install the EGW Sight Mount in the dovetail
3. Tighten the set screw (if applicable)
4. Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight)
5. Apply blue Loctite to the provided mounting screws
6. Torque the mounting screws to 15in/lbs

Two flat head cap screws are provided for use with the Trijicon RMR. A 5/64'' allen wrench is required for installation of the included screws. The mount can be removed and replaced with the rear sight at any time, with no alterations required.

*Note: The rear sight must be removed for installation.