When purchasing Egw or any other brand from eGoods365.com store, you can be sure that (a) you are purchasing from US based company with the most responsive and friendly customer service; (b) an authentic, not a counterfeit and not a refurbished product.

EGW mount allows you to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight by replacing the rear sight on your gun. Mounting hardware is included and you can always replace your rear sight at any time.

Follow these steps for installation:

1. Remove the rear sight*
2. Install the EGW Sight Mount in the dovetail
3. Tighten set screw (if applicable)
4. Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount is recommended)
5. Apply blue Loctite to the provided mounting screws
6. Torque mounting screws to 15in/lbs

Two Button Head Cap Screws and two Flat Head Cap Screws are provided for Vortex Viper and Venom Sights, and Burris FastFire and Docter Sights respectively. The screws included in this mount require a 5/64'' allen wrench for installation.

Note: This mount doesn't fit Ruger Flattop Revolvers.