When purchasing Egw or any other brand from eGoods365.com store, you can be sure that (a) you are purchasing from US based company with the most responsive and friendly customer service; (b) an authentic, not a counterfeit and not a refurbished product.

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.811"
Overall Width: .99"

Mounting Hardware:
- (2) 6-32 Button Head Screws
- (2) 6-32 Flat Head Screws
- (1) 6-32 Set Screw

Red Dot Fitment:
- Bushnell RXS-100
- Crimson Trace CTS-1500
- Holosun 407K*
- Holosun 507K*
- Holosun EPS-GR*
- Holosun EPS-RD*
- Holosun EPS-Carry-GR*
- Holosun EPS-Carry-RD*
- Jpoint
- Leupold Delta Point Pro
- Optima
- Redfield Accelerator
- Shield RMS
- Shield RMSc
- Shield SMS
- Sig Romeo Zero

EGW's red dot sights should be installed from left to right. The dovetail has a progressive taper to allow for easier install.

Using this mount, you can easily replace your rear sight and mount a Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight without needing to alter your gun. Mounting hardware is included.

Installation Instructions:
1. Remove the rear sight.
2. Install the EGW Sight Mount in the dovetail.
3. Tighten the set screw if applicable.
4. Place the red dot sight on the EGW Sight Mount (place a small piece of paper between the red dot sight and sight mount to prevent Loctite from getting on the red dot sight).
5. Apply blue Loctite to the provided mounting screws.
6. Torque mounting screws to 15 in/lbs.

The screws included in this mount require a 5/64'' allen wrench for installation. 2 Button Head Cap Screws are provided for Vortex Viper and Venom Sights, while 2 Flat Head Cap Screws are provided for Burris FastFire and Docter Sights.